Ubiquiti NanoStation M5 5GHz - NSM5 (EU Clover Powercord)
The Ubiquiti NanoStation M5 is a powerful all-in-one outdoor unit including 2 x 16 dBi antenna (MIMO) for the 5 GHz band. Unit allows real communication speeds up to 150 Mbps.
Another advantage is, beside of high data transfer rates thanks to the use of 802.11n standard, time multiplex TDMA, which allows the unit in the AP mode connect multiple clients with low latency.
Web administration is very simple and clear. Settings include:
AP mode, client or WDS
Between WAN and LAN routing and transparent bridge, with or without NAT NAT
Antenna polarization (vertical / horizontal / adaptive)
Disable or enable the output for an external antenna
Signal strength, which correspond to the specific LED indicator
Output power up to 27 dBi
In package is included a 24 V power supply and PoE injector, with the reset button which put device into TFTP firmware recovery mode.
TX Power regulation: yes
Comformity: FCC, CE
Default IP: 192.168.1.20
Default name: ubnt
Default password: ubnt
Dimension: 294 x 80 x 30 mm
Encryption: WPA, WPA2
Frequence: 5,4 - 5.825 GHz
Gain: 16 dBi
Interface : LAN, WiFI
IPv6 support: Transparent (Bridge mode)
LAN port: 2x RJ45 10/100 Mbps
Max. output power: 27 dBm
NAND: 8 MB
Operation mode : AP, Client, WDS
Operational temperature: -30 ~ 80 C
OS: AirOS V
Power supply: 15 V, 0,8 A
Procesor: MIPS 24KC, 400 MHz
Radiating angle - H: 43/41
Radiating angle - V: 15
RAM: 32 MB
Sensitivity: -96 dBm
Transmission speed: 300 Mbps
Weight: 0,4 kg
Contact Ubiquiti Technical Support via https://rma.ubnt.com/ and obtain RMA reference. Call PCS Customer Services with RMA reference to arrange repair/replacement. Warranty valid for 12 months from date of purchase.
Personal Computer Science (Ireland) 2004.
Whilst every effort has been made to ensure the information on this site is correct, Personal Computer Science (Ireland)
takes no responsibility for errors, omissions or misleading statements contained within this site or any of its links.